• Gate stops at 85 degrees – prevents damage to hinges if gate slammed open
• Reduces wear on gate and less need to adjust hinges
• Semi-soft rubber bumper minimizes gate bounce-back
• Weld or fasten – 12g Tek screws included
• Custom finish rated to 1,000 hours salt-spray and 500 hours UV – no need to grind off before welding
• Stainless steel components
• Horizontally adjustable for gate gaps of 1⁄2″ to 13⁄8″ (12-35mm)

The 7403 RF Gate Stop is designed specifically to work only with the SureClose® ReadyFit models.

*CAUTION: This gate stop will not work with other SureClose® hinge models.

The post SureClose ReadyFit Gate Stop appeared first on Outlaw Industries.

For more information check out the    SureClose Brochure 

Readyfit Features:

The post SureClose ReadyFit Hinge and Closer RF-108 appeared first on Outlaw Industries.

SureClose ReadyFit Hinges

Hydraulic SureClose® Gate Closers & Hinges are designed to replace conventional, bulky commercial gate hinges and closers. These strong and sturdy hinge-closers provide smooth, bind-free performance.

Superb engineering and patented design allow clever concealment of the hydraulics in a remarkably small housing. There is no compromise of quality with these small-footprint SureClose® gate closers and hinges.

Each ‘ReadyFit’ model lives up to its name by providing convenient screw slots and holes for sturdy fixing. 25mmx12g self-drilling Tek screws are supplied.

The slots allow fine vertical adjustment for speedy gate alignment. Horizontal adjustment is attained by way of a built-in, adjustable locking ring that rotates in or out as required to ensure the gate is level and overall alignment is achieved.

It’s remarkably simple for a commercial-style gate closer product. All SureClose® Hinges and Closers are made of high-grade Aluminum. Optional, L-shaped steel mounting brackets can either be welded or fastened to appropriate gate frames and posts.

   Check The SureClose Brochure

Externally Mounted, Hydraulic Self-Closing Hinge-Closer
• Controlled quiet close
• Gap variance of Min. ½” to Max. 1⅜” (12-35mm)
• Screw-on or weld-on (screws and brackets included)
• Final Snap-close action in all “108” models
• Maximum opening angle 88º
• Alignment legs give double face-fixing strength
• Emergency Override feature for safety and longevity
• Minimum fence post size 2″ (50mm)

• Must install a gate-stop to prevent the gate opening more than 90º
• One Hinge-Closer (108) + one Plain Hinge (SM) hold up to 180lb (80kg) – See Chart
• Two Hinge-Closers hold 260lb (120kg). See detailed table – See Chart

The post SureClose ReadyFit Hinge RF-SM appeared first on Outlaw Industries.