LOCINOX BUILT-IN ELECTRO-MAGNETIC LOCK FOR SWING GATES are clean lines and security assured with this magnetic lock’s installation. It’s installed right into the latching post. Our patented Quick-Fix fasteners and powder coating means it will hold up to the most extreme weather conditions. The rubber bumpers prevent shaking or damage to the gate and its hardware in case of harsh handling. The flexible assembly of the armature plate guarantees a solid latch connection even if the gate isn’t perfectly aligned.

AVAILABLE IN FOLLOWING RAL-COLORS

FEATURES

The post Locinox Built-in Electro-Magnetic Lock for Swing Gates appeared first on Outlaw Industries.

Screw-on magnetic lock without handle. Available in 2 versions. MAGMAG3000 with 660 lbs and MAGMAG5000 with 1200 lbs of pulling force.

The aluminum powder coated housing equipped with the unique Quick-Fix fixations ensures a fast and nicely finished mounting.

Eliminate time-consuming welding; drilling 5 holes is enough to fix the lock. A two-layer, protective coating guarantees that our electromagnetic locks are ready for years of worry free use outside.

Specifications:

• 500h salt spray resistant! SGS Certified (ISO 9227)
• Special two-layer protective coating developed for outdoor use
• SGS Certified
• Weatherproof aluminum housing designed for exterior use
• Anti-residual magnetism kick-off system
• Raised edge on the magnet housing makes it impossible to put a crowbar between the magnet and the armature plate
• Fail open
• Fast and easy fixing by means of 5 holes with Quick-Fix
• Current MAGMAG3000: 500 mA / 12 V or 250 mA / 24 V
• Current MAGMAG5000: 460 mA / 12 V or 230 mA / 24 V
• Voltage: 12V / 24V DC
• MAG3000: Minimal pulling force: 3000N (660 lbs)
• MAG5000: Minimal pulling force: 5000N (1200 lbs)
• Guaranteed holding force tested on every magnetic lock

The post Locinox Electro Magnetic Lock appeared first on Outlaw Industries.

The MAG is a bolt-on electromagnetic lock for powered access control. Available in 2 versions; the MAG3000 has up to 660 lbs. and the MAG5000 which has up to 1200 lbs. of pull force resistance.

The aluminum powder coated housing with integrated design handles gives your access control gate that extra elegant touch.

Stop losing precious time with welding boxes; drilling just 7 holes does the job – our patented Quick-Fix bolts help you install quickly and easily.

A two-layer, protective coating guarantees that our electromagnetic locks are ready for years of worry-free use in the outside elements.

Specifications:

• Guaranteed holding force tested on every magnetic lock
• 500h salt spray resistant! SGS Certified (ISO 9227)
• Tested according to ISO 9227
• Special two-layer protective coating developed for outdoor use
• Weatherproof aluminum housing designed for exterior use
• Anti-residual magnetism kick-off system
• Raised edge on the magnet housing makes it impossible to put a crowbar between the magnet and the armature plate
• Fail open
• Fast and easy fixing by means of 5 holes with Quick-Fix
• Voltage: 12V / 24V DC
• MAG3000: Minimal pulling force: 3000N (660 lbs)
• MAG5000: Minimal pulling force: 5000N (1200 lbs)
• Current MAG3000: 500 mA / 12 V or 250 mA / 24 V
• Current MAG5000: 460 mA /12 V or 230 mA / 24 V

AVAILABLE IN FOLLOWING RAL-COLORS

FEATURES

The post Locinox Electro Magnetic Lock – handles included appeared first on Outlaw Industries.