SHUT IT® 4″ Hardcore™ v-groove wheel with carriage is the 4” (102mm) of HardCORE V-Groove Wheel for 11⁄2” (38mm) Gate Frame is designed to be used on a gate with a 11⁄2” (38mm) bottom rail.

This wheel includes a set of SHUT IT 4” (102mm) HardCORE Carriage Plates, which make for the ideal UL325-compatible installation. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilises the roller bearings.

  Shut It Sell Sheet (PDF)

The post SHUT IT® 4″ HARDCORE™ V-GROOVE WHEEL WITH CARRIAGE appeared first on Outlaw Industries.

The SHUTIT! 4″ Wheel – 2.0″ Frame is the Wheel for 11⁄2” (38mm) Gate Frames is designed to be used on a gate with a 11⁄2” (38mm) bottom rail.

This wheel does not include carriage plates, so the user will have provide their own wheel box or plate system.

All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilises the roller bearings.

These Gate Wheels do not include Carriage Plates so you will need to provide your own wheel box or plate system (available for purchase separately).

Designed to be used on a gate with a bottom rail
• Models for different bottom rail widths1½ – 2″ (38 & 51mm)
• Two maintenance-free sealed bearings (no greasing)
• Only 1⅛” (29mm) wide to reduce friction and debris issues
• Super-hard cold rolled steel (30RC rating)
• This wheel does not include carriage plates
• Adjustable plates for perfect installations
• Load rating per gate: 3,000 lb (1,360kg)
• Max gate weight: 1,500 lb (680kg)
• Carriage plate and carriage cap available separately

  Check out the Shut IT Sell Sheet (PDF)

The post SHUTIT! 4″ Wheel – 2.0″ Frame appeared first on Outlaw Industries.

SHUTIT! 4″ Wheel – 1.5″ Frame is the 4” of HardCORE V-Groove Wheel for 1 1/2” Gate Frame is designed to be used on a gate with a 1 1/2” bottom rail.

This wheel does not include carriage plates, so user will have provide their own wheel box or plate system.

All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings.

   Check out the Shut IT Sell Sheet (PDF)

The post SHUTIT! 4″ Wheel – 1.5″ Frame appeared first on Outlaw Industries.

The SHUT IT! Extended Guide Assembly Guide Assembly is a smartass design by SHUT IT that replaces the industry standard guide rollers.

Simply weld a 21⁄2 x 21⁄2” (64 x 64mm) angle iron to your gate and attach the Guide Assembly to the end post.

The standard version is ideal for installations that do not have grade variations through the run distance of the gate while the Extended version is ideal for installations that have grade variations through the run distance of the gate.

Replaces the industry standard guide rollers
• Guide assembly welds to the endpost
• Suitable for L track guides
• Standard and extended models available
• Extended version ideal for gradients through run distance of gate
• Super hard steel
• Zinc finish

The post SHUT IT! Extended Guide Assembly appeared first on Outlaw Industries.

SHUTIT! Guide Assembly Is the HardCORE Guide Assembly is a smartass design by SHUT IT that replaces the industry standard guide rollers.

Simply weld a 21⁄2 x 21⁄2” (64 x 64mm) angle iron to your gate and attach the Guide Assembly to the end post.

The standard version is ideal for installations that do not have grade variations through the run distance of the gate while the Extended version is ideal for installations that have grade variations through the run distance of the gate.

For more Information Check out the     Shut It Sell Sheet (PDF)

Replaces the industry standard guide rollers
• Guide assembly welds to the endpost
• Suitable for L track guides
• Standard and extended models available
• Extended version ideal for gradients through run distance of gate
• Super hard steel
• Zinc finish

The post SHUTIT! Guide Assembly appeared first on Outlaw Industries.

SHUTIT! 6″ Cantilever Wheel Assembly is the 6” of HardCORE Cantilever Wheel Assembly is another SHUT IT smartass design. With this assembly a wheel can be installed on a rail rather than on a v-track on the ground surface.

These installations are ideal when installing a track on the ground is not feasible. Whether it is on a full cantilever gate system or the SHUT IT designed semi and quarter cantilever system, the HardCORE Cantilever Wheel Assembly is a perfect solution for the odd job.

Installed on a rail rather than on a v-track
• Ideal when installing a track on the ground is not feasible
• Adjustable plates for perfect installations
• Only 1 1/8″ (29mm) wide to reduce friction and debris
• Super-hard cold rolled steel (30RC rating)
• Load rating per gate: 3,000 lb (1,360kg)
• Maximum gate weight: 1,500 lb (680kg)

For more information check out the

   Shut It Sell Sheet (PDF)

The post SHUTIT! 6″ Cantilever Wheel Assembly appeared first on Outlaw Industries.

SHUTIT! 4 Inch Cantilever Wheel Assembly is the 4” of HardCORE Cantilever Wheel Assembly is another SHUT IT smartass design.  With this assembly a wheel can be installed on a rail rather than on a v-track on the ground surface.

These installations are ideal when installing a track on the ground is not feasible.  Whether it it on a full cantilever gate system or the SHUT IT designed semi and quarter cantilever system, the HardCORE Cantilever Wheel Assembly is a perfect solution for the odd job.

Installed on a rail rather than on a v-track
• Ideal when installing a track on the ground is not feasible
• Adjustable plates for perfect installations
• Narrow width reduces friction and debris
• Super-hard cold rolled steel (30RC rating)
• Load rating per gate: 3,000 lb (1,360kg)
• Maximum gate weight: 1,500 lb (680kg)

For more information check out

   Shut It Sell Sheet (PDF)

The post SHUTIT! 4″ Cantilever Wheel Assembly appeared first on Outlaw Industries.

Like The ORIGINAL, all bolt-on gate hinges by SHUT IT! are CNC machined to the tightest tolerances in the industry.

Unlike The ORIGINAL, The Half Bolt-On BadAss was designed to be used on gates where welding the hinges to the end post is not an option (no field welder).

Due to SHUT IT’s unique bushing design The Half Bolt-On BADASS’s, like all other SHUT IT gate hinges, produces near frictionless movement with maintenance free usage.

The Half Bolt-On BadAss Hinges feature high-temperature sealed bearings which not only allow for the smooth operation you would expect from these hinges, but also allows the hinges to be welded, and then powder-coated with your custom swing gate.

For more Information Check out     Shut It Sell Sheet (PDF)

The Half Bolt-On BadAss Hinge Features:

• The Half Bolt-On BadAss™ hinges were designed to be used on gates where welding to a post or gate is not an option (no field welder)
• Two Sealed Bearings (no greasing)
• High-temp Bearings, Safe to Powder-Coat
• Limited Lifetime Warranty
• Zinc Plated
• Adjustable Yoke For Perfect Installations
• Flat Bot-on Brackets For Through Bolting
• Load rating per gate: 2,000 lb (900kg)
• Maximum gate weight: 1000 lb (450kg)
• Bolt-on Installation
• Welds to aluminum gates and bolts to fence post
• Horizontally adjustable to 1/2″ (13mm)

Special Order Item: Shut-It Bolt-On hinges may require 5-7 days to make and ship. Please allow 10-15 days for delivery during peak seasons.

The post SHUT IT Half Bolt On BadAss Hinge appeared first on Outlaw Industries.

The Bolt-On BadAss was designed to be used on gates where welding the hinges to the gate and the end post is not an option.

Due to SHUT IT’s unique bushing design The Bolt-On BadAsses, like all other SHUT IT gate hinges, produces near frictionless movement with maintenance free usage.

For more Information Check out     Shut It Sell Sheet (PDF)

The Bolt-On BadAss Hinge Features:

• Bolt-On BadAss™ hinges were designed to be used on gates where welding to a post or gate is not an option (no field welder)
• Two Sealed Maintence Free Bearings (no greasing)
• High-temp Bearings, Safe to Powder-Coat
• Limited Lifetime Warranty
• Zinc Plated
• Yoke For Perfect Installations
• Adjustable bracket for round or square posts
• Flat, bolt-on brackets for through-bolting
• Load rating per gate: 2,000 lb (900kg)
• Maximum gate weight: 1,000 lb (450kg)
• Bolt-on Installation

Special Order Item: Shut-It Bolt-On hinges may require 5-7 days to make and ship. Please allow 10-15 days for delivery during peak seasons.

The post SHUT IT! Bolt On BadAss Hinge appeared first on Outlaw Industries.

All bolt-on gate hinges by SHUT IT are CNC machined to the tightest tolerances in the industry. The 4″, 6” and 8″ (102mm, 152mm & 203mm) Round Bolt-On Hinges are designed to strap round posts to a flat gate frame.

The Bolt-On BadAsses produce near frictionless movement with maintenance free usage.

For more Information Check out     Shut It Sell Sheet (PDF)

Bolt-on hinges for round to square posts
• High-temperature sealed bearings – safe to powder coat with hinges installed on gate
• No greasing, no maintenance. EVER!
• Horizontal adjustability for perfect installations
• For square to round post
• Adjustable barrel for precise installations
• Flat, bolt-on brackets for through bolting
• Zinc plated
• Load rating per gate: 2,000 lb (900kg)
• Maximum gate weight: 1,000 lb (450kg)

The post SHUT IT! 8″ Round Bolt On BadAss Hinge appeared first on Outlaw Industries.