The FortiMa is a magnetic child-safe gate latch that ensures safety, security and ease of entrance. FortiMa’s patented internal leverage allows for smooth opening and, with its unmatched magnetic force, closes securely.

The anodized aluminium and powder coated components make the FortiMa as attractive as it is functional, adding elegance and value to your pool, park, playground or back yard.

Installation is easy on a wide range of gate materials and being compatible with most international code requirements, the FortiMa can be rekeyed to match any existing lock.

Install the FortiMa and relax in the long-lasting, rust-free, security of your gate.

Specifications:

• Extreme weather resistance in any climate
• Unique and extremely durable patented design with anodized aluminium housing
• Strongest magnetic force on the market: magnetic distance of 30 mm (2x industry standard!)
• Tested up to 2 million cycles – Limited Lifetime Warranty!
• Rekeyable to match any lock: Schlage-C Key-in-knob cylinder (5pin, drilled 6pin)
• Full vertical adjustability and 25 mm horizontal adjustability – a gap of 10 mm up to 45 mm
• For left & right turning gates
• Push down prevention: only opens when magnet is pulled up, adding additional security
• Perfect for metal, vinyl or wooden gates, available for round (R) and square (K) posts
• *Before installing, always confirm any safety compliance requirements with the respective authorities

Check out the new products Brochure HERE!

The post Locinox Child Safe Magnetic FortiMa Latch for Pools and Parks appeared first on Outlaw Industries.

The Locinox® TT-PIVOT Lower Pivot Bearing Hinge & Flange Assembly is designed for use with full height turnstiles.

Available in both Ball Bearing (TT-PIVOT-BB) and Tapered Roller Bearing (TT-PIVOT-CC) options which are mounted in a 5/8″ (17 mm) thick aluminum footplate.

Locinox TT-PIVOT Lower Bearing & Flange Assembly Features:

• Aluminum floor plate to be adjusted to the turnstile diameter
• TT-PIVOT-BB: double sealed, stainless steel ball bearing (440 lbs axial load)
• TT-PIVOT-CC: tapered roller bearing, protected by footplate (1,650 lbs axial load)
• Stainless steel ∅ 1″ axis with centered M12 threaded hole

The post Lower Pivot Bearing Hinge and Flange Assembly for Full Height Turnstiles appeared first on Outlaw Industries.

LOCINOX BUILT-IN ELECTRO-MAGNETIC LOCK FOR SWING GATES are clean lines and security assured with this magnetic lock’s installation. It’s installed right into the latching post. Our patented Quick-Fix fasteners and powder coating means it will hold up to the most extreme weather conditions. The rubber bumpers prevent shaking or damage to the gate and its hardware in case of harsh handling. The flexible assembly of the armature plate guarantees a solid latch connection even if the gate isn’t perfectly aligned.

AVAILABLE IN FOLLOWING RAL-COLORS

FEATURES

The post Locinox Built-in Electro-Magnetic Lock for Swing Gates appeared first on Outlaw Industries.

LOCINOX INTEGRATED MAGNET LOCK FOR SLIDING GATES S-MAG is the perfect product to lock any type of sliding gate. It has a guaranteed tensile strength of 600 lbs and resists extreme weather conditions. The rubber bumpers prevent shaking of the gate, and damage to the gate and its accessories in case of harsh handling, and the flexible assembly of the armature plate guarantees a normal closing even if the gate isn’t perfectly aligned.

AVAILABLE IN FOLLOWING RAL-COLORS

FEATURES

The post LOCINOX INTEGRATED MAGNET LOCK FOR SLIDING GATES appeared first on Outlaw Industries.

LOCINOX COVER SHIELD FOR MORTISE LOCKS are Cover shields for handle & cylinder holes of Locinox mortise locks. Available in aluminum, stainless steel or polyamide for an aesthetic finish.

The post Locinox Cover Shield for Mortise Locks appeared first on Outlaw Industries.

The LOCINOX SURFACE MOUNTED ELECTRIC STRIKE WITH SECURITY MUSHROOM is an electric strike that is designed to be used with  LA style locinox locks.

It can also to replace your SHKL non electric strike keep with an electrical surface mounted keep with Fail Close / Fail Open functionality.

Easy to install thanks to the patented Quick-Fix. For 12V-24V and AC/DC. Modulec-SH is available in two versions: Fail close and Fail open

AVAILABLE IN FOLLOWING RAL-COLORS

FEATURES

The post LOCINOX SURFACE MOUNTED ELECTRIC STRIKE WITH SECURITY MUSHROOM appeared first on Outlaw Industries.

The LOCINOX Verticlose for Wall-Mounted Gates has been specifically designed for wall mounting where the gate closer itself is positioned at a 90° position in relation to the gate. The specially designed arm turns around the wall or post, ensuring a large opening angle.

The aesthetic anodized aluminum gate closer with high-tech internal components ensures an exceptionally long life span.

Specifications:

• Gate closer for wall-mounting with adjustable closing speed and final action
• Specially designed arm for wall mounting while guaranteeing a big opening angle
• Weatherproof, scratch resistant and corrosion free anodized aluminum housing
• Robust yet stylish design with high quality components
• Integrated pretension for extra smooth installation
• Consistent closing speed thanks to patented hydraulic damping
• Firmly fixed thanks to patented Quick-Fix system
• ADA compliant (< 5 lbs; max 25 Nm) from gate widths of 4ft. or more

AVAILABLE IN FOLLOWING RAL-COLORS

FEATURES

The post LOCINOX VERTICLOSE FOR WALL-MOUNTED GATES appeared first on Outlaw Industries.

SureClose® ConcealFit features ‘Final Snap-Close Action’, which increases speed at the end of closing to ensure latching and to overcome electric or coded locks. Soft, quiet closure protects the gate’s latching/locking system. ‘Closing Speed’, ‘Final Snap-Close’ and ‘Backcheck’ are adjustable using a simple Allen key. The hinge-closer is easily adjustable in three dimensions (horizontal, vertical and in/out) for fine positioning and speedy gate alignment. Gate gaps can be as low as 5/64″, which means no exposed parts to serve as a climbing foothold, thereby increasing security.

This hinge-closer set also features UL10C fire-rating, and is tested to ADA and ANSI/BHMI Standards. Designed to never leak hydraulic fluid, the SureClose® ConcealFit technology is extremely safe and will not present resistance if closed quickly in an emergency. SureClose® ConcealFit is suitable for pool and safety gates*. With NO hold-open feature, it opens to, and self-closes from, 125°. Weld boxes for aluminum or steel gates, and routing templates for wood gates, are sold separately (Special Order). All SureClose® ConcealFit housings are made of high-grade aluminum.

The post SURECLOSE CONCEALFIT FOR GATES appeared first on Outlaw Industries.

LOCINOX SURFACE MOUNTED US MORTISE CYLINDER GATE LOCK (USA) Or the Locinox LUKYJ5 Series Surface Mounted US Mortise Cylinder Gate Lock is an excellent gate lock constructed with a durable aluminum housing and stainless steel locking mechanism, which makes it perfect for use outside, even in the harshest environments. This lock has been designed specifically around the standard 1-1/8″ US mortise cylinder which is commonly used on doors and gates across the country. This lock provides two-sided keyed access and is perfect for any installation.

Locks are supplied as Keyed Different and include a pair of Schlage C keyway 5-pin (6-pin drilled) cylinders per lock, with matching keys. The cylinders can be easily swapped out to match the other locks in your facility if need be. Both the stainless steel latch and dead bolt have 3/8″ of continuous adjustment which allows for perfect alignment of the locking mechanism. With a generous 7/8″ throw, the bolts guarantee secure locking.

Locks are available in Black or Silver, for both 1-1/2″ and 2″ Square gate frames. You can easily use the silver lock on round framed chain link swing gates by pairing it with a round post adapter and chain link holder. Use the 1-1/2″ Square lock for 1-5/8″ Round gate frames and the 2″ Square lock for 1-7/8″ Round gate frames.

NOTE: Requires a 3-3/8″ spacing between gate upright and 1st picket, fitting nicely into most gates.

Ordering Notes:

The handle style depends on the finish that you choose. Silver locks ship with modern aluminum handles, while black locks ship with the industrial style handles.

The post LOCINOX SURFACE MOUNTED US MORTISE CYLINDER GATE LOCK (USA) appeared first on Outlaw Industries.

The Locinox® Modulec-SA Surface Mounted Electric Keep is a fast and easy way to add electric strike capabilities to gates. Fast and easy installation thanks to the Quick-Fix mounting system. This is the Emissa model which means that the electric strike is Fail-Close/Secure meaning that in the event of a power failure, the electric strike/keeper will remain secure. You can still unlock your lock to gain access even when the power is out.

The Modulec-SA can also be used to easily upgrade existing Locinox installations using the SA & SH keeps!

Specifications:

• Tested up to 500 000 movements
• Fast and easy fixation with Quick-Fix bolts
• 660 lbs. holding force on the latch bolt
• Same drilling pattern as SA, SH and SM keeps
• Easy left or right hand changing
• Corrosion resistant: black anodized aluminum housing
• Adjustable for profiles: 1-1/2″ to 2-1/2″
• Voltage: 12V-24V AC/DC
• Consumption: 12V – 1,25A / 24V – 0,62A
• Power: 15W

Looking for a reliable fail close electric strike for gate access control? The Locinox Modulec surface mounted option is designed to stay secure during power loss.

AVAILABLE IN FOLLOWING RAL-COLORS

FEATURES

The post LOCINOX MODULEC SURFACE MOUNTED ELECTRIC STRIKE appeared first on Outlaw Industries.